V7000-08A-LLM-I AI Pro

This section describes only general specifications. For more advanced specifications, contact the onsite product manager.

Hardware Specifications

Category	Type	V7000-08A-LLM-I AI Pro (32CH)
Controller	CPU model	64-bit high-performance 4-core processor
Memory	/	12 GB
Storage capacity NOTICE: To ensure reliability, you are advised to configure two or more disks for the HWT-IVS1800. 200 GB is allocated from each disk as the system partition to store data such as logs, Data Safe backup data, and third-party application data. The remaining space is used as the data partition to store recordings and images.	Built-in storage	32 GB eMMC
	Disk capacity	Enterprise-level disks: 4 TB, 6 TB, 8 TB, 10 TB, or 16 TB Monitoring-level disks: 6 TB NOTE: Currently, the HWT-IVS1800 does not support SMR disks. The following SMR disks have been blocklisted and cannot be initialized: ST4000VX005-2LY104-500 and ST4000VX005-2LY104-177. Only disks in the HWT-IVS1800 Compatibility List are supported. Disks that are not in the HWT-IVS1800 Compatibility List may have compatibility issues and are not recommended.
	Maximum number of disks	8 NOTE: Disks are not hot-swappable.
	RAID mode	The storage space consists of the system partition and data partition. The data partition supports RAID 0 and RAID 5. Only the system partition supports RAID 1. During disk initialization: If there are two or more disks, the system partition is in RAID 1 mode by default. The data partition supports the non-RAID mode and RAID 5 mode (in the standard or economical configuration type).
External port NOTE: Video, audio, and USB ports are reserved hardware ports and do not support the LDU.	Network port	2 x 1000 Mbit/s Ethernet ports NOTE: The configuration of the network port must be consistent with that of the peer network port. That is, both ports are configured with the auto-negotiation mode or 1000 Mbit/s full-duplex mode.
	USB port	Front: 2 x USB 2.0 Rear: 1 x USB 3.0 NOTE: USB extension cables are not supported.
	Audio port	1 x RCA input port 1 x RCA output port
	Video port	2 x HDMI 2.0 + VGA output port (can be extended by using an external conversion cable)
	I/O alarm port	16-channel I/O input 4-channel I/O output
Power supply	Power supply specifications	100 V AC to 240 V AC; 250 W
Power supply	Power supply module quantity	1
Power consumption	Maximum power consumption (without disks)	40 W
Power consumption	Maximum power consumption (with disks fully configured)	120 W
Weight (without disks)	/	6.6 kg
Others	Dimensions (H x W x D)	86.1 mm x 447 mm x 470 mm
	Operating temperature	–10°C to +55°C Without disks, or with disks whose temperature range is –5°C to +70°C 0°C to +45°C With disks whose temperature range is +5°C to +60°C
	Humidity	20% to 90%
	Noise	55 dB

Software Specifications

Category	Type	V7000-08A-LLM-I AI Pro (32CH)
Storage	Video	32-channel 1080p, up to 320 Mbit/s access bandwidth Device-edge collaborative analysis: 256 Mbit/s
Storage	Image/Intelligent camera access (0.5 image/second/channel)	32-channel 1080p
Forwarding	Video	32-channel 1080p, up to 320 Mbit/s access bandwidth
Playback and download	Video	32-channel 1080p, up to 160 Mbit/s playback bandwidth
Intelligent analysis	Inspection large model (image-based analysis)	Inspection: 32 channels Soft real-time: 16 channels Soft real-time + Inspection: 16 ≤ Total number of concurrent channels < 32; Total number of concurrent channels = 32 – Soft real-time channels Non-real-time and soft real-time inspection algorithms support image- and video-based hybrid analysis: 16–32 channels (depending on the computing power of the algorithms) NOTE: Inspection algorithms (8s): on-duty sleeping detection, absence detection, fire route obstruction detection, goods obstruction detection, garbage overflow detection, falling detection, and smoke and fire detection The smoke and fire detection algorithm does not support the detection of smoke only. The scenario restrictions are as follows: Scenario 1: no obvious obstacles or outdoor places with strong backlight in the campus, clear fires Scenario 2: fires in suburban woods, fires on the road side, or smoke and fires from barbecues Soft real-time algorithms (4s): smoking detection, cell phone use detection, hard hat detection, and workwear detection Real-time algorithms (two frames per second): fight detection (supported only when the resolution is lower than 4K; mutually exclusive with other inspection algorithms). The scenarios and specifications are as follows: Supported scenario: education campus (campus checkpoints, corridors, and classrooms), with no more than five people fighting Algorithm specifications: At least one of the following actions lasts for 30s or longer: Hair pulling: One person pulls the hair of another person, or two persons pull each other's hair. Continuous punching: One person punches another person, or two persons punch each other.
Intelligent analysis	Inspection large model (video-based analysis)	Non-real-time or soft real-time: 4MP or lower: 16 channels (4MP, 4K]: 8 channels Higher than 4K: 4 channels Real-time (fight detection): mutually exclusive with other inspection algorithms 4K or lower: 8 channels Higher than 4K: 4 channels Non-real-time and soft real-time inspection algorithms support image- and video-based hybrid analysis: 16–32 channels (depending on the computing power of the algorithms) NOTE: Inspection algorithms (8s): on-duty sleeping detection, absence detection, fire route obstruction detection, goods obstruction detection, garbage overflow detection, falling detection, and smoke and fire detection The smoke and fire detection algorithm does not support the detection of smoke only. The scenario restrictions are as follows: Scenario 1: no obvious obstacles or outdoor places with strong backlight in the campus, clear fires Scenario 2: fires in suburban woods, fires on the road side, or smoke and fires from barbecues Soft real-time algorithms (4s): smoking detection, cell phone use detection, hard hat detection, and workwear detection Real-time algorithms (two frames per second): fight detection (supported only when the resolution is lower than 4K; mutually exclusive with other inspection algorithms). The scenarios and specifications are as follows: Supported scenario: education campus (campus checkpoints, corridors, and classrooms), with no more than five people fighting Algorithm specifications: At least one of the following actions lasts for 30s or longer: Hair pulling: One person pulls the hair of another person, or two persons pull each other's hair. Continuous punching: One person punches another person, or two persons punch each other.

Hardware Specifications
Software Specifications